USB-Stick Miner GekkoScience 2Pac 5,5 to 25 GH/s (33 GH/s max.)

36.00 excl. shipping

Availability: In Stock
- +
Compare
SKU: 2pac-stickminer-1 Categories: , Tags: , , , , , ,

USB Miner GekkoScience 2Pac 5,5 to 25 GH/s (33 GH/s max.)

The 2Pac USB stick Miner for SHA256 based Crypotcoins like Bitcoin, Namecoin, DEM and others delivers an average hash rate of 11-15 GH/s and can be safely boosted up to 25 GH/s when clock rate and voltage will be adjusted. The theoretical max. hash rate is ~ 33 GH/s.

This Miner is equipped with two highly power efficient AntMiner BM1384 ASIC (same chip as on Bitmain’s AntMiner S5).

It enumerates in CGMiner software as an COMPAC-2 which gives command-line frequency control for both ASICs to adjust the hash rate. Moreover the miner is equipped with a fully adjustable voltage regulator that allows a core voltage range of 1.26V to 1.5V without requiring “pencil modding” or soldering skills.

The average power consumption is 0.3W/GH which makes this device currently  the most powerful Bitcoin Stickminer on the market.

The Miner will be delivered with a quality aluminium heat sink mounted which provides a low thermal resistance and supports natural convection as well as active cooling. When overclocked and/or voltage regulated (more than 100 MHz) we highly recommend active cooling.

The power consumption depends on the clock rate and the set core voltage and varies from 2 W to ~14 W. Usage of an active USB hub is highly recommended to avoid damage on standard USB ports.

This Miner is manufactured and assembled by GekkoScience.com for the EU market.

Software and hardware requirements:

  • Host-PC with Windows x86 (32-bit or 64bit), Linux (x86 or ARM) or Mac OSX.
  • The Miner uses a CP2102 USB to UART bridge controller. Drivers can be downloaded here: Silicon Labs CP2102
  • Please note: An active USB hub with adequate power supply is highly recommended (such as Anker 9-Port, Asicminer 49-Port, Orico 10-Port).
  • Please note: Due to the large heat sink the overall height of the device is 15mm. This may cause difficulties using all USB ports of an active USB hub.

This product contains:

 

USB-Stick Miner GekkoScience 2Pac 5,5 bis 25 GH/s (33 GH/s max.) – bitshopper edition  1 piece

Specifications:

ASIC chip type BM1384
Hashrate Hash rate up to 25 GH/s (when overclocked and voltage regulated). Active cooling is highly recommended.
Mining mode Mines on any pool
Power consumption 2 to 14 W per USB port. An active USB hub is highly recommended.
Product dimensions 9,9 x6,9x 2cm
Net weight 0,8 kg

 

 

 

Weight 100 g
Hashrate

Power consumption

Reviews

There are no reviews yet.

Be the first to review “USB-Stick Miner GekkoScience 2Pac 5,5 to 25 GH/s (33 GH/s max.)”

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.

You may also like…

Back to top
X